Roborock S6 vs Roomba i7: Roborock strives to differentiate itself from the Xiaomi brand and advance the robot vacuum cleaner industry. Meanwhile, the Roomba brand continues to dominate the market with its remarkable technology and innovative combinations. The Roborock S6 endeavors to take a portion of the Roomba i7 market.
You have several options if you are researching a new robot vacuum. This article compares and contrasts the Roborock S6 and Roomba i7 based on their most salient characteristics to determine the superior choice. While I believe the i7 is the superior model, you may find the S6 a better match for your house. Read on to learn why.
Comparison of the Roborock S6 Vs Roomba i7
The Roborock S6 and Roomba i7, like most contemporary robot vacuums, are difficult to criticize. Let’s examine how they vary from one another.
- The Roborock S6 can mop; however, the Roomba i7 does not.
- The Roborock S6 has a runtime of 250 minutes, which is twice that of the Roomba i7 (Roomba runtime of 120 minutes).
- Navigation and mapping. The Roomba i7 uses camera-based navigation and mapping, while the Roborock S6 employs laser-guided LDS navigation.
- Printing Technology The i7 is equipped with Imprint Technology. Enabling robot communication and increased mapping capabilities.
- Choose Room. The Roborock employs Select Room instead of Imprint Smart Mapping for scheduling and confinement.
- Both robots have sensors, although the Roborock has 14 while the Roomba has just 8.
- Roborock’s warranty duration is one year longer than the one-year guarantee included with all Roomba machines.
- The Roomba i7 is upgradable to the i7+ model. There is no enhancement option available for the S6.
- Roomba collects dirt with its innovative two brushless extractors. The model of Roborock employs a brush roll.
Comparable Features of the Two Robots
Since both robots do comparable tasks in your house. Let me demonstrate their significant commonalities.
- Measurements and weight. Both robots are of comparable size and mass.
- Recharge and continue. Each model will begin cleaning.
- Both the i7 and the S6 include HEPA-quality filters.
- Voice and wireless controls.
- Side brushes. A single-side brush cleans edges and corners on both machines.
- Digital confinement. You may use the app to determine where and when each robot cleans.
- Both Roborock S6 and Roomba i7 are clean with all kinds of flooring.
One-side sweeping
We may as well begin the comparison with a unilateral triumph. Roborock S6 can sweep, vacuum, and mop. The Roomba robots do not sweep. Therefore Roborock automatically wins by default. Does it, however, mop well?
The fact is that the Roborock lineup has better off if the mopping function is eliminated. I say this so I can say that the mop works, and it works better than any prior model. You have located one of the finest robots capable of vacuuming and mopping.
As you likely already know. There is a genuine wet mop present. The Roborock S6 includes a water tank that distributes water onto the mopping pad. Which is pulled over the floor, unlike other models that need you to wet the pad or spray the floor with water.
The Mop is better than the Roborock S5.
The only improvement over the S5 model is the ability to control the water flow. There is a toggle switch for selecting between low flow and high flow. If you choose a low flow. The mop pad will get wet. But it will take a long. The floor cleaned before the pad is sufficiently moist to make a difference is disadvantaged.
Roborock also suggests vacuuming and sweeping the floor before sending out the mopping robot. However, it is recommended that you vacuum and sweep three times consecutively before mopping. Most individuals are unwilling to do this. And even when the directions are followed to the letter, streaks, debris, and tire tracks remain.
The Roborock S6 wins this category since the Roomba cannot sweep. With the mop’s poor performance, though, the Roomba may as well win.
Read Also: Do Robot Vacuums Scratch Wood Floors?
Both Models Charging System
The i7 and S6 check their batteries, returning to their docking stations when the charge level falls below 15 percent.
Once the batteries are recharged. They will restart cleaning from where they left off if the cleaning cycle is not finished. This capability, known as Recharge and Resume, is exclusive to robot cleaners with the capacity to develop and save maps. I will elaborate on how the Roomba i7 and Roborock S6 can generate and save maps later in the text.
However, the Roborock has a minor edge in this situation. When a cleaning cycle ends replenish the battery. The charging cycle will end when the battery is 80 percent charged. It will then restart cleaning and, after the cleaning cycle is complete, return to charge the battery completely.
However, the i7 model will charge its battery 100 percent around 45 minutes before the Roborock.